|
|
|
E. Watson, A.M. Tatara, D.P. Kontoyiannis, and A.G.
Mikos, “Inherently Antimicrobial Biodegradable Polymers in Tissue
Engineering,” ACS Biomater. Sci. Eng., 3, 1207-1220 (2017).
[Abstract]
[HTML]
[PDF]
S.T. Heo, A.M. Tatara, C. Jiménez-Ortigosa, Y.
Jiang, R.E. Lewis, J. Tarrand, F. Tverdek, N.D. Albert, P.E.
Verweij, J.F. Meis, A.G. Mikos, D.S. Perlin, and D.P.
Kontoyiannis, “Changes in In Vitro Susceptibility Patterns of
Aspergillus to Triazoles and Correlation with Aspergillosis
Outcome in a Tertiary Care Cancer Center, 1999-2015,” Clin.
Infect. Dis., 65, 216-225 (2017).
[Abstract]
[HTML]
[PDF]
E.J. Lee, B.K. Huh, S.N. Kim, J.Y. Lee, C.G. Park,
A.G. Mikos, and Y.B. Choy, “Application of Materials as Medical
Devices with Localized Drug Delivery Capabilities for Enhanced
Wound Repair,” Progr. Mater. Sci., 89, 392-410 (2017).
[Abstract]
[HTML]
[PDF]
L.G. Bracaglia, B.T. Smith, E. Watson, N.
Arumugasaamy, A.G. Mikos, and J.P. Fisher, “3D Printing for the
Design and Fabrication of Polymer-Based Gradient Scaffolds,” Acta
Biomaterialia, 56, 3-13 (2017).
[Abstract]
[HTML]
[PDF]
S. Wang, Y. Yang, Z. Zhao, X. Wang, A.G. Mikos, Z.
Qiu, T. Song, X. Sun, L. Zhao, C. Zhang, and F. Cui, “Mineralized
Collagen-Based Composite Bone Materials for Cranial Bone
Regeneration in Developing Sheep,” ACS Biomater. Sci. Eng., 3,
1092-1099 (2017).
[Abstract]
[HTML]
[PDF]
A.M. Tatara, E. Watson, T. Satish, D.W. Scott, D.P.
Kontoyiannis, P.S. Engel, and A.G. Mikos, “Synthesis and
Characterization of Diol-Based Unsaturated Polyesters: Poly(Diol
Fumarate) and Poly(Diol Fumarate-co-Succinate),”
Biomacromolecules, 18, 1724-1735 (2017).
[Abstract]
[HTML]
[PDF]
Y. Du, H. Liu, Q. Yang, S. Wang, J. Wang, J. Ma, I.
Noh, A.G. Mikos, and S. Zhang, “Selective Laser Sintering Scaffold
with Hierarchical Architecture and Gradient Composition for
Osteochondral Repair in Rabbits,” Biomaterials, 137, 37-48 (2017).
[Abstract]
[HTML]
[PDF]
T. Guo, T.R. Holzberg, C.G. Lim, F. Gao, A. Gargava,
J.E. Trachtenberg, A.G. Mikos, and J.P. Fisher, “3D Printing PLGA:
A Quantitative Examination of the Effects of Polymer Composition
and Printing Parameters on Print Resolution,” Biofabrication, 9,
024101 (11pp) (2017).
[Abstract]
[HTML]
[PDF]
J.E. Trachtenberg, J.K. Placone, B.T. Smith, J.P.
Fisher, and A.G. Mikos, “Extrusion-Based 3D Printing of
Poly(Propylene Fumarate) Scaffolds with Hydroxyapatite
Gradients,” J. Biomater. Sci., Polym. Ed., 28, 532-554 (2017).
[Abstract]
[HTML]
[PDF]
B.T. Smith, M. Santoro, E.C. Grosfeld, S.R. Shah,
J.J.J.P. van den Beucken, J.A. Jansen, and A.G. Mikos,
“Incorporation of Fast Dissolving Glucose Porogens into an
Injectable Calcium Phosphate Cement for Bone Tissue
Engineering,” Acta Biomaterialia, 50, 68-77 (2017).
[Abstract]
[HTML]
[PDF]
S.R. Shah, B.T. Smith, A.M. Tatara, E.R. Molina,
E.J. Lee, T.C. Piepergerdes, B.A. Uhrig, R.E. Guldberg, G.N.
Bennett, J.C. Wenke, and A.G. Mikos, “Effects of Local
Antibiotic Delivery from Porous Space Maintainers on Infection
Clearance and Induction of an Osteogenic Membrane in an Infected
Bone Defect,” Tissue Eng. Part A, 23, 91-100 (2017).
[Abstract]
[HTML]
[PDF]
M. Santoro, B.A. Menegaz, S.E. Lamhamedi-Cherradi,
E.R. Molina, D. Wu, W. Priebe, J.A. Ludwig, and A.G. Mikos,
“Modeling Stroma-Induced Drug Resistance in a Tissue-Engineered
Tumor Model of Ewing Sarcoma,” Tissue Eng. Part A, 23, 80-89
(2017).
[Abstract]
[HTML]
[PDF]
T.N. Vo, A.M. Tatara, M. Santoro, J.J.J.P. van den
Beucken, S.C.G. Leeuwenburgh, J.A. Jansen, and A.G. Mikos,
"Acellular Mineral Deposition within Injectable, Dual-Gelling
Hydrogels for Bone Tissue Engineering," J. Biomed. Mater. Res.
Part A, 105A, 110-117 (2017).
[Abstract]
[HTML]
[PDF]
|
