*Place your document on the staging area.

*Power on the Document Camera by pressing the POWER button located on the upper Left side of the staging area.


*Press the VIDEO SOURCES button.

*Look at the Wall Plate that the Document Camera is plugged into. It will be labeled SIDE PLATE or END PLATE. Press PC of the corresponding plate label. When you do this – the Screen will lower, LCD projector will power up and the Document Camera will route to the projector.

*If the image is out of focus – wave your hand over the document you are trying to project – this will engage the auto focus mechanism and refocus on your document.

*If you need to zoom on a particular area of the document you are displaying, use the ZOOM controls located on top of the camera head.